Rose electronics UltraVista Instrukcja Obsługi Pobierz pdf (Strona 10)

INSTALLATION

UltraVista Installation and Operations Manual 5

Installation

Installation – 1 Video Source

The modular design of UltraVista allows for multiple extensions units to be added and the flexibility to adapt to any

video wall installation size. Figure 3 shows a typical example of a 2 x 2 video wall with a single video source.

Connect all UltraVista units together with the enclosed short serial cables. Connect the lower serial port (board B) of

the main unit to the upper serial port (board A) of the first extension unit. When installing more than one extension

unit, connect all the units by connecting the “B” serial port of one unit to the “A” port of the next.

Connect the video source to a video splitter, and connect the splitter’s outputs to the channel 1 inputs (labeled “1”) on

all UltraVista main and extension unit. If you want to use two video sources, connect the second video source in the

same manor to the channel 2 inputs from a second DVI/VGA splitter. (See Figure 4)

Connect the monitor outputs on the main and extension unit to the displays.

Main A board Main B board

Channel 1 Channel 1

Wall width 2 Wall width 2

Wall height 2 wall height 2

Position 1 Position 2

Extension A board Extension B board

Channel 1 Channel 1

Wall width 2 Wall width 2

Wall height 2 wall height 2

Position 3 Position 4

Figure 3. Single Video source installation

Main Unit

Extension Unit

1 to 4 Video splitter

Main A Main B

Extension A Extension B

Serial

cable

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 56 57

Brak uwag

Rose electronics UltraVista Instrukcja Obsługi Strona 10